NEW TURTLE 07-519008 3.5" 10 CAPACITY HARD DRIVE WATERPROOF CASE ATA CERTIFIED

Description

TURTLE BY PERM-A-STORE 3.5" HARD DRIVE WATERPROOF CASE
Turtle Cases for Hard Drives and Flash or SSD Drives are engineered specifically to protect digitally recorded information.  Precision cut Anti-static foam in a heavy duty, waterproof case provides data management professionals with confidence and the peace of mind they demand when transporting or storing high value data.
Product Features and Benefits
Precision cut anti-static foam holds drives securely and dissipates static charges
Heavy duty construction - crushproof
Stainless steel hardware prevents rust.
Double movement latches prevent accidental opening.
Ergonomic, easy to grip handle
Made in North America
ATA Certified
Double padlockable.
Lifetime warranty.
Part Number
07-519008
UPC
702119679558
Weight
4.4000
Inside Dimensions
13.8" x 9.3" x 6.2"
Outside Dimensions
15.8" X 12.4" X 6.8"
Carton Dimensions
16" X 13" X 7"
Waterproof
Yes
Fireproof
N/A
Certifications
Waterproof  IPX7
Dustproof  IP6X
Impact  ATA 300
Drop Test  ASTM D-4169 CC-18
Vibration  STM D-4169 DC-18
Rainfall  ASTM D-4169 DCc-18
Immersion  MIL-STD-810F
Descriptions of Tests
ATA Specification 300 Category 1
Airline transport container suitable for a minimum of 100 airline trips
Impact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm.
Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were
conditioned to a temperature of -20°C before impact exposure.
ASTM D-4169 DC-18
Level 1 Schedule A Handling (Manual)
Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with
loads of 6.8-31.8kg(15-70lbs) determined by case size.
Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3
hours at each condition.
ASTM D-4169 DC-18
Level 1, Schedule F loose load vibration
Vibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks
occurred during transportation of loose loads.
ASTM D-4169 DC-18
Level 1, Schedule H Environmental Hazard Rainfall
Simulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C.
MIL-STD-810F
Method 512.4
Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for
30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.
IP 67 ingress protection
6- Total protection from dust
7- Protected against the effects of immersion between 15cm(5.9”) and 1m(39.37”)
OTHER TYPES OF TAPE AND HARD DRIVE CASES AVAILABLE